Weeknight Plan

Scale · Practical note

How to measure a baking pan, and how much it holds

Quick answer

Lay a ruler across the inside of the pan at the top edge, wall to wall, and skip the rolled lip. That gives the size the recipe means. Then stand the ruler on the floor of the pan to read the side height. For how much it holds, pour in water one cup at a time until it reaches the rim. A 9 x 13 with straight 2 inch sides holds about 16.2 cups, because a cup is 14.4375 cubic inches.

Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

Updated October 10, 20265 min readPrintable checklist

  • 14.4375cubic inches in one US cup (231 in a gallon, divided by 16)
  • 16.2 cupsto the rim of a 9 x 13 with straight 2 inch sides (117 × 2 ÷ 14.4375)
  • 18%less floor if a pan sold as 9 x 13 measures 8 x 12 across the bottom
  • 2.54 cmin one inch, for pans sized in centimeters

Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

The cause

Why it happens

A pan's name is a rough size. Recipes, pan charts and the converter all assume you know the real one.

1

The name comes from the top edge

Pans are sized across the top, inside the walls. Measure the outside, or include the rolled lip, and you add half an inch or more.

2

Sloped sides shrink the floor

Many metal and glass pans flare outward. A pan sold as 9 x 13 can measure 8 x 12 across the bottom, which is 96 square inches against 117, about 18% less.

3

Side height decides what fits

Two pans with the same floor can hold very different amounts. A 10 x 15 jelly roll pan has 1 inch sides, so it fills up long before a 9 x 13 does.

4

Odd shapes have no formula

A Bundt, a fluted tart pan or a heart has no simple length times width. Water gives you its capacity in a couple of minutes.

Figure

A 9 x 13 pan cut through the long side (not to scale) Size: inside top edge, 13 in Floor: often shorter when the sides slope Side height, 2 in Rolled lip: not counted Holds to the rim (straight sides): 13 × 9 × 2 ÷ 14.4375 = 16.2 cups
Where to put the ruler: across the inside top edge for the size, upright on the floor for the side height. The rolled lip doesn't count.

The fix

Step by step

  1. Measure the size across the top

    Lay a ruler or tape across the top of the pan, inside the walls, from one side to the other. Do the long side, then the short side. Leave out the rolled lip, and round to the nearest quarter inch.

  2. Measure the side height

    Stand the ruler upright on the floor of the pan, against the inside wall, and read where the top edge meets it. Most cake and baking pans come out between 1 and 3 inches.

  3. For a round pan, measure through the middle

    Run the ruler across the widest part of the circle, inside the wall. That number is the diameter, the size printed on the pan.

  4. Work out what it holds

    For straight sides: length × width × side height ÷ 14.4375 gives cups. A 9 x 13 with 2 inch sides comes to 234 ÷ 14.4375 = 16.2 cups. For sloped sides or odd shapes, fill it with water from a 1 cup measure and count the cups to the rim.

    Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

  5. Write it down once

    Put the size, side height and cups on the pan drawer card from the pan size converter, or on a strip of masking tape under the pan. You won't need to measure that pan again.

At a glance

What common pans hold to the rim with straight sides, 2 inches tall

PanFloor areaSide heightHolds to the rim
8 in round50.3 sq in2 in7.0 cups
9 in round63.6 sq in2 in8.8 cups
8 x 8 in64 sq in2 in8.9 cups
11 x 7 in77 sq in2 in10.7 cups
9 x 9 in81 sq in2 in11.2 cups
10 x 15 in jelly roll150 sq in1 in10.4 cups
9 x 13 in117 sq in2 in16.2 cups

What common pans hold to the rim with straight sides, 2 inches tall (the jelly roll pan has 1 inch sides). Sloped sides hold less, so trust your own water count.

Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

Let the tool do the arithmetic

Pan size converter

Swap a recipe's pan for the ones you own. Compare floor area, batter depth and how full each pan gets, split one batch across pans, and print a pan card.

Open the pan size converterPrintable pan drawer card

Figure

8 cups of batter from a 9 x 13 recipe, side view, drawn to the same depth scale 0.99 in 9 x 13 (recipe) 49% full 0.90 in Two 8 x 8 45% full 1.43 in 9 x 9 71% full 0.77 in 10 x 15, 1 in sides 77% full 2 in rim Depth = batter ÷ floor: 8 × 14.4375 = 115.5 cubic inches over 117, 128, 81 and 150 sq in
What the measurements are for: the pan size converter uses floor area and side height to show how deep the same batter sits in each pan and how full each one gets.

Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

What a pan holds is not how much batter goes in

The rim number is the most the pan can take. How much batter you use comes from the recipe, and how full that leaves each pan is what the converter shows. We don't give baking times or temperatures; keep the ones in your recipe.

Pan measuring kit

  • Ruler or tape measure
  • 1 cup liquid measure and a pitcher of water
  • Size: inside top edge, wall to wall, no lip
  • Side height: ruler upright on the floor
  • Round: across the middle = diameter
  • Cups = length × width × height ÷ 14.4375
  • Sloped or odd shape: count cups of water to the rim
  • Centimeters ÷ 2.54 = inches
  • Write it on the pan drawer card

Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

Weeknight Plan · weeknightplan.com/scale/guides/measure-a-pan/

Asked often

Questions

How do you measure a baking pan?

Measure across the inside of the top edge, wall to wall, without the rolled lip. That's how pans are named. For a round pan, measure across the middle for the diameter.

How many cups does a 9 x 13 pan hold?

With straight 2 inch sides, 117 square inches × 2 inches = 234 cubic inches, and 234 ÷ 14.4375 = about 16.2 cups to the rim. Pans with sloped sides hold less, so a water count is the surer number.

Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

How do I find out how much a Bundt pan holds?

Fill it with water from a 1 cup measure and count the cups until it reaches the rim. Then enter that number in the converter under "Other shape (by capacity)".

My pan is sized in centimeters. What is it in inches?

Divide by 2.54. A 23 x 33 cm pan is 9.06 x 12.99 inches, which is a 9 x 13. A 20 cm square is 7.87 inches, close to an 8 x 8.

Source: NIST Handbook 44 (2026), Appendix C, checked October 10, 2026.

Do the math

Tools for this

Keep reading

More guides

Checked and dated

Sources

Numbers only, not nutrition, dietary, food-safety or financial advice. See every source on the sources page. Spotted an error? Tell us.

Photos: Arwen / Unsplash, Rens D / Unsplash, Ello / Unsplash and 12 more, see photo credits